Description

SOLVENT-BORNE & WATERBORNE
SPRAY GUN CLEANER

SOLVENT-BORNE SPRAY GUN CLEANING (left side)

Automatic Cleaning
• 14 L (3.7 gal) of wash solvent is pumped through
14 jets to flush the fluid passage and exterior of
2 spray guns in under 1 minute. A final rinse of
100 cc of clean solvent and air flush completes
automatic cleaning.
• Automatic Cleaning is faster than cleaning by hand,
allowing more cars to be painted each day.
• Automatic Cleaning provides a consistent result as
opposed to cleaning by hand.
• Additional manual cleaning, when required, is
provided by a flow-through brush. Solvent flow
is activated by a foot pedal.
• Automatic cleaning greatly reduces the
Painter’s exposure to solvent for a healthier
environment. Spray guns are cleaned with
solvent in an enclosed tank; the operation is
“Hands Free”. The vent automatically extracts
fumes when the lid is raised. If the lid is
accidentally raised during cleaning, the operation
stops, to prevent solvent exposure.
• Wash solvent is reused until dirty, reducing solvent
consumption, a “Green” approach. Wash solvent
can also be recycled in a Uni-ram solvent recycler
then reused.

WATERBORNE SPRAY GUN CLEANING (right side)

Manual Cleaning
• Waterborne spray guns are cleaned effectively with
3 cleaning tools.
• Wash gun delivers high pressure water to flush the
fluid passage in under 15 seconds.
(See photo on back page)
• Flow-through brush removes paint from the
outside of the spray gun.
• Air gun dries the spray gun.
• The cleaning power of water is enhanced by
the addition of AQUA-KLEEN, Uni-ram’s
cleaner.
• The used water can be recovered and reused
reducing waste water consumption and disposal
costs, it is a “Green” approach.

UG5000W Common Features
• CE Approved.
• Complete with pressure regulator. Minimum air
pressure is 6 bar (85 psi).
• Dimensions: 119 cm w x 43 cm d x 117 cm h
Dimensions: 47″ w x 17″ d x 46″ h
Weight: 77 kg (170 lb)